top of page
Marble Surface

Academic Projects

  • PhD Thesis

Removal of Metal Ions from Wastewater using Adsorption: Experimental and Theoretical Studies (Link)

  • M.E

Study of Pressure Swing Adsorption Process for the Production of Hydrogen.

  • B.Tech.

Techno-Economic Feasibility Study on the Manufacture of Polypropylene from Propylene

Thesis Supervised

  • 2014-15

    • Mudit Chauhan, “Calculation of Water Influx and its Impact on Oil Recovery in Edge Water Drive Oil Reservoirs”, BITS Pilani

    • Ankush Gupta, Rohit Raghuvanshi, “Optimization of various processes for the production of Dimethyl Ether using ASPEN Plus platform”, BITS Pilani

  • 2015-16

    • Anubhav Das, “Analysis of VDU Products”, BITS Pilani

  • 2016-17

    • Tejas Shetiya, Shamali Chavan, “CO2 Absorption of Novel Ionic Liquid”, DYPIEMR, Pune

    • Priyanshu Kumar, Prakash Kelkar, “Optimization of Biodiesel Production from Castor Seed Oil”, DYPIEMR, Pune

    • Bhoir Shekhar Chandrakant, Surushe Shivaji Madhavrao, “Removal of Sulphur from Diesel Oil by using adsorption process”, DYPIEMR, Pune

    • Ketaki R. Sawarkar, Sandesh S. Kalgaonkar, “Simulation of Carbon-dioxide Capture using MEA Process”, DYPIEMR, Pune

    • Savita V. Shetty, Hrishikesh P. Kulkarni, “Extraction of Nicotine from Tobacco Leaves used for Animal Cleansing”, DYPIEMR, Pune

  • 2017-18

    • Raju Kale, Rohit Deve, “Removal of Heavy Metal Ions from Industrial Effluents Using Low Cost Adsorbent (Neem Bark) ”, DYPIEMR, Pune               

    • Rutuja Patil, Kiran Shinde, “Extraction of Essential Products From Citrus Fruits”, DYPIEMR, Pune

    • Mrunal Khobragade, Sreelakshmi Mohan, “Optimization of Biodiesel Production using ASPEN Plus”, DYPIEMR, Pune

    • Akash Sampat Nimsakhre, Prashant Uttam Padwal, “Cogeneration of Heat and Electric Energy by using Solar Energy”, DYPIEMR, Pune

  • 2018-19

    • Vinit Ponkshe, Ashwin Ponnapan, “Synthesis of Tetrapropyl Ammonium Bromide”, DYPIEMR, Pune

    • Soham Gurav, Aditya Chaure, “Study of Steel Pickling & Finding HCl Concentration in Percentage”, DYPIEMR, Pune

  • 2019-20

    • Shreyas Divakar Jagdale, Yogesh Kalyan Jathar, “Preparation of Soap from Coconut, Soyabean, Olive, Neem and Castor Oil”, DYPIEMR, Pune

    • Saurabh Jadhav, Khushal Jogi, “Design of spiral finned crystallizer”, DYPIEMR, Pune

    • Sadiya Sadaf A. Khan, Sana Desai, “Analyzing and Modifying Correlation of Environmental Compensation Used By Central Pollution Control Board of India”, DYPIEMR, Pune

    • Akshay V. Jadhav, Suraj G. Raut, “Design of Lithium-ion battery”, DYPIEMR, Pune

    • Ankit Kothawade, Development of Nano-Adsorbent for Industrial Waste Water Treatment”, DYPIEMR, Pune

    • Amit Raut, “Utilization of Plastic Waste in Construction”, DYPIEMR, Pune

  • 2020-21

    • Divya Humne, Rachana Gaikwad, “Self Healing Concrete”, DYPIEMR, Pune

    • Pratik Shirish Gore, Shivraj Sudhir Khutwad, “Liquid Fertilizer production by Membrane contactors”, DYPIEMR, Pune

    • Akash Bongane, Abhishek Patil, “Modeling Evaluation for Pyrolysis of Biomass & Waste Plastic”, DYPIEMR, Pune

    • Neha Pradip Ambekar, Rujuta Rajeshri Dhote, “Formation of Iron Oxide Powder from Mill Scale”, DYPIEMR, Pune

    • Krushna Chinte, Prajwal Kshirsagar, “Optimization of a biodiesel production process using process simulation”, DYPIEMR, Pune

    • Sachin J Patel, Swaraj S Sontakke, “Production of fuel from Plastic Waste”, DYPIEMR, Pune

  • 2021-22

    • Aman Singh, Mangesh Karwe, "Production of Hydrogen/Syngas by Steam Methane Reforming - A Techno-economic feasibility report”, DYPIEMR, Pune

    • Tanashree Paraye, Ayush Gondane, "Production of Bioethanol from sugarcane”, DYPIEMR, Pune

    • Amit Kaldate, Hritik Kale, "Techno-economical feasibility report on Production of Acetaldehyde”, DYPIEMR, Pune

    • Rahul Taskar, Abhishek Yadav, "Manufacturing of Bio– Degradable Plastic”, DYPIEMR, Pune

    • Sandip Pawar, Sopan Ethape, Fermenter Design for Production of Citric Acid from Sugarcane Molasses”, DYPIEMR, Pune

    • Omkarnath Panage, Sejal Ahuja, "Production Of Oxalic Acid From Molasses”, DYPIEMR, Pune

  • 2022-23

    • Sejal Narkar, Prathmesh Polshetiwar, "Biodiesel Production Utilizing Flow Chemistry", DYPIEMR, Pune

    • Akshat Chorpra, Darpan Varshney, "Studies on use of Graphene oxide for removal of heavy metal and dyes", DYPIEMR, Pune

    • Chetan Parse, "Optimization of process for production of nitric acid", DYPIEMR, Pune

    • Harshal Raut, Pranav Salunkhe, "Graphene Based Superhydrophobic Coating for Wooden Articles", DYPIEMR, Pune

    • Kalyani Padvi, "Designing of Crystallizer"", DYPIEMR, Pune

Marble Surface

Projects/ Seminars Supervised

  • Economic Analysis of Petroleum Refinery (2010)

  • Simulation of Catalytic Reforming Process using Aspentech Software (2010)

  • Safety Aspects of Petrochemical Industry (2010)

  • Onshore & Offshore Drilling (2010)

  • Simulation of Vacuum Distillation Unit using Aspen Plus (2010)

  • Simulation of Atmospheric Distillation Unit using Aspen Plus (2010)

  • Modeling and Simulation of  Fluid Catalytic Cracking Unit (FCCU) (2010)

  • Simulation of Hydro-alkylationde- (HDA) Process Plant using Aspen Plus (2010)

  • Optimization of Styrene Process using Aspen Plus (2011)

  • Optimization of Propylene - Propane Distillation Process using Aspen Plus (2011)

  • Simulation and Optimization of Production of Butyl Acetate using Aspen Plus (2011)

  • Gas Lift - An Artificial Lift Technology (2011)

  • Modeling of CO2 Flooding, An Enhanced Oil Recovery Technique (2011)

  • Enhanced Oil Recovery through Alkaline Flooding, a Tertiary Recovery Technique (2011)

  • Water Coning: A Major Reason for the Decline in Overall Recovery of Oil from the Reservoir (2011) 

  • The Role and Importance of Water Influx in Gas Reservoirs (2011)

  • A Review on the Multiphase Behavior of Oil-Brine-Surfactant Systems in Relation to Changes in Pressure, Temperature and Oil Composition (2011)

  • Role of Polymer Flooding in Enhanced Oil Recovery: A Review (2011)

  • Separation of Produced Emulsions from Surfactant Enhanced Oil Recovery Processes (2011)

  • Surfactant Flooding, a Tertiary Method for the Recovery of Oil from the Reservoir (2011)

  • Optimization of Vinyl Chloride Monomer (VCM) Production using Aspen Plus (2012)

  • Simulation and Optimization of Cumene Plant using Aspen Plus (2012) 

  • To Study the Mechanism of Popcorn Polymer Formation in Butadiene Extraction Plant using Acetonitrile (2012)

  • Optimization of a Hydro-Cracking Tower using Aspen Plus (2012)

  • Wastewater Treatment using Nanotechnology (2012)

  • Extensive Study of Carbon Credits for Mitigation of Carbon Dioxide using Biofiltration (2012)

  • Waste Water Treatment using Oil/Water Separation (2012)

  • CO2  Sequestration: A Novel technology (2012) 

  • Natural gas clathrate hydrates: A potential energy source for the future (2012)

  • In situ gasification: A source for syngas production for future (2012)

  • Coal bed methane: An alternate source to overcome the energy demand (2012)

  • Blue preserve- recovery of oil spilled in sea: A review (2012)

  • Drilling fluids: a necessity during drilling- A review (2012)

  • Effect of Water Influx in Oil recovery (2012)

  • Advancement in the development of Drilling rigs (2012)

  • Natural Gas Hydrates – The mother of all flow assurance challenges  (2012)

  • Chemical Looping combustion: A technique available for separating out CO2  (2012)

  • Influence of key parameters on crude oil desalting: A review (2012)

  • A review on the options available for the recovery of viscous crude oil  (2012)

  • Alkaline-surfactant-polymer as a chemical source in the Chemically enhanced oil recoverymethod. (2012)

  • Effect of Foam mobility control on the Enhanced Oil Recovery methods. (2012)

  • Downhole Catalytic Upgrading of Heavy oil: An economical approach  (2012)

  • Enhanced oil recovery- using steam: The possibilities and benefits (2012)

  • CO2, a potential source for Enhanced oil recovery (2012)

  • Removal  CO2 of  from natural gas (2012)

  • Optimization of separation process for the removal of gaseous propane from semi rich gas through a cryogenic approach (2013)

  • Simulation and Optimization of Cumene production from Propylene and Benzene using Aspen Plus (2013)

  • Optimization of partial oxidation of natural gas to synthesis gas using Aspen Plus (2013)

  • Simulation and Optimization of Naphtha cracking & hydrogenation of Nitrobenzene (2013)

  • ETBE production from naphtha cracking: An approach towards Optimization (2013)

  • Simulation and Optimization of Acrylonitrile Production using ASPEN Plus (2013)

  • Simulation and Optimization of Production of Phthalic Anhydride (2013)

  • ASPEN Plus simulation of removal of CO2 & N2 from Natural gas (2013)

  • Microemulsions for enhanced  oil recovery: A review (2013)

  • Oil Sands: From reserves to refineries and its Environmental Impacts (2013)

  • Theoratical study of Tight Oil and Shale Gas (2013)

  • Production of water in an enhanced coal bed methane operations(2013)

  • Deep water reservoirs (2013)

  • High pressure and high temperature wells (2013)

  • Optimization of gas-oil three stage separator's pressure to increase stock tank oil (2013)

  • Temperature distribution in a deep water well (2013)

  • The drilling rigs (2013)

  • Key parameters affecting the desalting of unconventional crude oil - Desalting operation (2013)

  • Thermal enhanced oil recovery method (2013)

  • A study on the various types of Logging (2013)

  • Recent advances in Enhanced Oil Recovery (2013)

  • Environmental Impact Assesment of Enhanced Oil Recovery (2013)

  • Fire Flodding as an Enhanced Oil Recovery techniquie (2013)

  • Microbial Enhanced Oil Recovery (2013)

  • Enhanced oil recovery using foam: A study (2013)

  • A comparative study between fire flood and other EOR methods (2013)

  • Study on fluid catalyst cracking (2013)

  • Study of reforming process in oil refineries (2013)

  • Study of the industrial processes for the polymer manufacturing (2013)

  • To study the drop point of grease, melting point of wax and bomb calorimeter analysis in context to petroleum sector by performing Laboratory experiments (2013)

  • To study the smoke point and bomb calorimeter analysis in context to petroleum sector by performing Laboratory experiments (2013)

  • Design & Optimisation of Production of 1,3 – Butadiene with ASPEN Plus (2014)

  • Natural Gas Sweetening Process: Simulation and Optimization (2014)

  • Simulation and Optimizationof production of Cyclohexane from benzene using ASPEN Plus (2014)

  • Sour Water Stripping System (2014)

  • Aspen Simulation and Optimization of Ethylbenzene Production (2014)

  • Natural Gas Sweetening Process by Using MDEA As Solvent (2014)

  • Aspen simulation of formaldehyde production by Silver catalyst process from Methanol (2014)

bottom of page